<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>子墨斋 - &lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</title>
    <link>https://www.hrdmv.com/forum.php?mod=forumdisplay&amp;fid=103</link>
    <description>Latest 20 threads of &lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</description>
    <copyright>Copyright(C) 子墨斋</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 06 May 2026 12:28:03 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>https://www.hrdmv.com/static/image/common/logo_88_31.gif</url>
      <title>子墨斋</title>
      <link>https://www.hrdmv.com/</link>
    </image>
    <item>
      <title>焊接时主要事项</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=7977</link>
      <description><![CDATA[　注意事项　　塑料焊接，采用加热和加压或其他方法使热塑性塑料制品的两个或多个表面熔合成为一个整体的方法。 　　焊接作业中发生火灾、爆炸事故的原因 1、　　焊接切割作业时，尤其是气体切割时，由于使用压缩空气或氧气流的喷射，使火星、熔珠和铁渣四处飞溅（较大 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>piaowings</author>
      <pubDate>Sat, 23 Oct 2010 05:00:33 +0000</pubDate>
    </item>
    <item>
      <title>焊接方式</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=7976</link>
      <description><![CDATA[　选用不同的金属材料，使用不同的焊接工艺,焊接的艺术性可以在不同的金属艺术形式中发挥得淋漓尽致： 1、金属焊接雕塑　　在焊接雕塑作品中，焊缝和割痕不是作为一种技术加工的痕迹被动地存在，而是以一种精彩的、不可或缺的表现语言着力地加以体现的。一件焊接雕塑， ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>piaowings</author>
      <pubDate>Sat, 23 Oct 2010 04:59:51 +0000</pubDate>
    </item>
    <item>
      <title>焊接工艺</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=7975</link>
      <description><![CDATA[焊接工艺　　焊接是一个局部的迅速加热和冷却过程，焊接区由于受到四周工件本体的拘束而不能自由膨胀和收缩，冷却后在焊件中便产生焊接应力和变形。重要产品焊后都需要消除焊接应力，矫正焊接变形。 　　现代焊接技术已能焊出无内外缺陷的、机械性能等于甚至高于被连接 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>piaowings</author>
      <pubDate>Sat, 23 Oct 2010 04:59:18 +0000</pubDate>
    </item>
    <item>
      <title>焊接技术  有需要的顶起</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=7974</link>
      <description><![CDATA[焊接是通过加热、加压，或两者并用，使同性或异性两工件产生原子间结合的加工工艺和联接方式。焊接应用广泛，既可用于金属，也可用于非金属。 
　　焊接技术是随着金属的应用而出现的，古代的焊接方法主要是铸焊、钎焊和锻焊。中国商朝制造的铁刃铜钺，就是铁与铜 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>piaowings</author>
      <pubDate>Sat, 23 Oct 2010 04:58:43 +0000</pubDate>
    </item>
    <item>
      <title>论焊缝符号标注</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2494</link>
      <description><![CDATA[中国工程物理研究院结构力学研究所 王春云

摘 要 本文针对焊接设计图中的常见错误，结合有关标准内容对焊缝符号表示法的要点及几个标注特例作了简要阐述。 
关键词 焊缝符号 标注 

1 前言 

(1)GB/T 324和GB/T 12212的贯标特点 

GB/T 324—1988《焊缝符号表示法》和G ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 19:05:18 +0000</pubDate>
    </item>
    <item>
      <title>焊接知识扫盲贴　焊接材料</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2493</link>
      <description><![CDATA[焊接材料
1. 什么叫焊接材料？包括哪些内容？
答：焊接材料包括焊条、焊丝、焊剂、气体、电极、衬垫等。
2.什么叫焊丝？
答：焊接时作为填充金属，同时用来导电的金属丝—叫焊丝。分实心焊丝和药芯焊丝两种。常用的实心焊丝型号：ER50-6（牌号：H08Mn2SiA）。
3.为什么M ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 19:03:41 +0000</pubDate>
    </item>
    <item>
      <title>可替代银焊丝的130高温钎焊实现铜与钢的焊接--记130高温钎焊</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2492</link>
      <description><![CDATA[拿工作中的一个实例来说吧,在压缩机上,中央空调上,很多制冷管都采取铜管与不锈钢管或者铜管与镀锌管的焊接,在解决这类管焊接的时候首选的是银焊丝,或者低含量银焊丝.截止到今天2008年3月13号1#银的期货价4660-4670(元/千克),也就是说如果生产企业在制造这样的散热管如果 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 18:33:10 +0000</pubDate>
    </item>
    <item>
      <title>这是不锈钢和铜的焊接头图片</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2491</link>
      <description><![CDATA[1、采用TIG方法，钨极电弧必须偏离不锈钢一侧，而指向铜一侧．距坡口中心约为5～8 mm，以控制不锈钢的熔化量。
2、选择铜焊丝或Cu－Ni焊丝作为填充材料。根据生产条件，也可以选择含AI的青铜焊丝．目的是为了改善焊缝金属的力学性能和防止产生铜渗透裂纹。

3、选择合适 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 18:27:48 +0000</pubDate>
    </item>
    <item>
      <title>不锈钢和铜的焊接方法</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2490</link>
      <description><![CDATA[铜和不锈钢的焊接现在使用的材料比较多的是紫铜S201,铝青铜S214
不锈钢与铜的焊接主要困难在于两者熔点、导热系数、热膨胀系数不同,而容易导致钢未焊透和不锈钢烧穿。烙化焊时,铜容易浸到钢的晶粒之间,产生热应力,导致焊缝开裂。因此需要采取一系列的特殊工艺措施,如采 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 18:01:09 +0000</pubDate>
    </item>
    <item>
      <title>焊接符号 weld-symbols英文</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2489</link>
      <description><![CDATA[焊接符号 weld-symbols英文weld-symbols,英文]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 17:29:52 +0000</pubDate>
    </item>
    <item>
      <title>焊前预热及焊后热处理的作用</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2487</link>
      <description><![CDATA[重要构件的焊接、合金钢的焊接及厚部件的焊接，都要求在焊前必须预热。焊前预热的主要作用如下：
　　（1）预热能减缓焊后的冷却速度，有利于焊缝金属中扩散氢的逸出，避免产生氢致裂纹。同时也减少焊缝及热影响区的淬硬程度，提高了焊接接头的抗裂性。
　　（2）预热可 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 17:08:08 +0000</pubDate>
    </item>
    <item>
      <title>不锈钢焊条型号及选用</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2486</link>
      <description><![CDATA[整理了一下,方便大家看看,由于时间的关系,只是编辑了一下,对它的正确没做校正,见谅!]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 17:06:50 +0000</pubDate>
    </item>
    <item>
      <title>钛及钛合金的焊接工艺</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2485</link>
      <description><![CDATA[气体及杂质污染对焊接性能的影响
  　在常温下，钛及钛合金是比较稳定的。但试验表时，在焊接过程中，液态熔滴和熔池金属具有强烈吸收氢、氧、氮的作用，而且在固态下，这些气体已与其发生作用。随着温度的升高，钛及钛合金吸收氢、氧、氮的能力也随之明显上升，大约在2 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 16:53:44 +0000</pubDate>
    </item>
    <item>
      <title>不锈钢型号解释</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2484</link>
      <description><![CDATA[1. 不锈钢 指在大气及弱腐蚀介质中耐蚀的钢。腐蚀速率小于0.01mm/年的，认为是\&quot;完全耐蚀\&quot;；腐蚀速率小于0.1mm/年的，认为是\&quot;耐蚀\&quot;的。 

2. 耐蚀钢 指在各种强烈腐蚀介质中能耐蚀的钢。 

各种不锈钢的耐腐蚀性能 

304 是一种通用性的不锈钢，它广泛地用于制作要求良好 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 16:49:23 +0000</pubDate>
    </item>
    <item>
      <title>浅谈不锈钢表面处理过程存在问题及预防措施</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2483</link>
      <description><![CDATA[浅谈不锈钢表面处理过程存在问题及预防措施
1 不锈钢件常用表面处理方法
1.1 前言
不锈钢具有独特的强度、较高的耐磨性、优越的防腐性能及不易生锈等优良的特性。故广泛应用于化工行业，食品机械，机电行业，环保行业，家用电器行业及家庭装潢，精饰行业，给予人们以华 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 16:44:28 +0000</pubDate>
    </item>
    <item>
      <title>铜铝焊接-阐述怎样把铜和铝焊到一起的?</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2482</link>
      <description><![CDATA[铜铝焊丝-铜铝焊接


铜铝焊丝-铜铝焊接


铜铝焊丝-铜铝焊接 铜铝线焊接


铜铝焊丝-铜铝焊接


铜铝焊丝-铜铝焊接

一般情况下，铜和铝是很难焊到一起的。因为铜和铝的熔点相差很大。所以，熔焊很难解决这个问题。那么可以采用钎焊，但基于钎焊材料的限制和钎焊操作 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 16:05:37 +0000</pubDate>
    </item>
    <item>
      <title>铜铝焊接在变压器行业生产中存在的问题及解决方法！</title>
      <link>https://www.hrdmv.com/forum.php?mod=viewthread&amp;tid=2481</link>
      <description><![CDATA[问题一：变压器行业的铜铝导电排在焊接时的理想状态是使铜和铝的接触面积尽量的大并且均匀。也就是说，铜片和铝片接触的部位尽量大的充满焊料。这样可以避免局部发热的问题，而实际生产中，很多企业采用四百多度的药芯焊丝，这种焊丝在焊接时，没有一个焊工可以保证焊接 ...]]></description>
      <category>&lt;font color=Red size=3&gt;焊接技术&lt;/font&gt;</category>
      <author>子墨</author>
      <pubDate>Sun, 07 Dec 2008 15:58:34 +0000</pubDate>
    </item>
  </channel>
</rss>